Bowser 
Pressure Washer 1,125L

(250 Gallon) 3,000 psi

Home » Plant Equipment » Bowsers » Towable Pressure Washer Site Bowser 1,125 Litre / 3,000 PSI

Dimensions (Approximate)

Width 1,213mm
Length 1,213mm
Overall height 1,410mm
Laden weight 1,145kg
Unladen weight 700kg
Chassis:
Chassis Constructed from 80 x 80 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised.
Axle/Suspension:
Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½“ pcd hubs.
Wheels and Tyres:
2 no. 175 x 13 8 ply commercial van tyres on 5½” pcd 4 stud rims.
Coupling:
Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever.
Ancillary Equipment:
Moulded mudguards, front telescopic jockey wheel, rear lighting board.
Optional: Hand rewind hose reel.

Tank:
Elliptical in section, baffled & moulded from polyethylene & fitted with an 18”lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted, 2” bottom drain underneath rear of tank Inner anti surge baffle. 1125 litre (250 Gallon) 3,000 psi
Pump:
Yanmar electric start L100 10HP engine driving a 200 Bar (3,000 psi), 15Lpm piston pump c/w hand lance & 7m of hose stowed on bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9Hrs.
Finish:
Tank moulded in yellow/red/blue or green polyethylene. Chassis galvanised.